| View previous topic :: View next topic |
| Author |
Message |
renowden
Joined: 15 Oct 2007
Posts: 68
Location: Bristol, England
|
 Posted: Mon Feb 09, 2009 9:44 pm Post subject: Re-scan All |
 |
|
A small oddity I have noticed.
First I would comment that when opening a WAV file for correction, it automatically scans based on the last set of parameters entered. It would be nice if it came up with the Tape/Vinyl selection panel but ...
... having scanned it on vinyl when it should be tape I selected Re-scan ALl and changed it to tape which was fine except that the fine red line in the bottom pane representing click frequency was still there and with wriggles suggesting that it was using data from the earlier vinyl scan.
A second (third) unrelated observation. When in Track mode and with spectrogram on then at 0.1 second intervals the spectrogram shows up at the bottom. This is nice but it doesn't move with the track boundary as the end points are adjusted.
_________________
Cheers,
Rick Parsons
Bristol, England |
|
| Back to top |
|
 |
Derek
Site Admin
Joined: 01 Jan 2005
Posts: 467
Location: Coleshill, United Kingdom
|
| Posted: Tue Feb 10, 2009 9:16 am Post subject: |
|
|
Hello Rick
Yes, thanks for bringing these problems to my attention. I'll fix them in the next release. This won't be too difficult to do.
Regarding the first point , I may add a third choice in Auto-Scan Options of 'always ask'.
best regards
_________________
Derek Higgins
Wave Corrector Developer
http://www.wavecor.co.uk |
|
| Back to top |
|
|
Glenn
Joined: 28 Feb 2005
Posts: 212
Location: Toronto, Canada
|
| Posted: Sat Feb 14, 2009 8:06 pm Post subject: Re: Re-scan All |
|
|
| Derek wrote: | | I may add a third choice in Auto-Scan Options of 'always ask'. |
Hi Derek, I'd appreciate it if you implemented this option. Sometimes the last setting is not the best one for a new session.
Glenn |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
